Rottler VR10
Valve Refacing Machine with Turcite Slideways
Machine Operations
Valve Refacing
VR10 BrochureOverview
The VR10 sets new standards in speed and accuracy for Performance Racing and Remanufacturing cylinder head work. The air operated 2 x 3 Ball Precision Chuck System eliminates collets. Valve face is machined concentric to the valve stem for improved sealing, better heat transfer and reduces mechanical stresses on valves.
- Precision Hardened Tool Steel Chuck System - Pneumatic Operated Quick Action 2 X 3 Ball Precision Chuck driven by large, heavy duty variable speed gear motor. The 2 X 3 ball chuck allows a wide range of valve stem diameters to be ground without changing any parts - no collets or wrenches! The 2 X 3 ball chuck gives extremely accurate run-out for improved sealing, better heat transfer and reduces mechanical stresses on valves.
- 3 Phase Grinding Wheel Motor - Single Phase power supply is converted to 3 phase to give smooth grinding without any vibrations.
- Turcite Coated Slideways - Low Friction for smooth stroking of Grinding Wheel over Valve.
Features
Standard Equipment
(VTRW-9)
Control
Variable Valve Rotation Speed allows the operator to adjust surface speed for different diameter valves for best surface finish for a wide range of valve head diameters from small multi-valve to large diesel valves.
Control Panel features Variable Chuck Speed Control, Valve Counter and Selector for Valve Grinding or Wheel Dressing.
Specifications
| VR10 Machine Specifications | American | Metric |
|---|---|---|
| Control | Manual | |
| Base Cabinet | Optional | |
| Valve Stem Diameter Range (with Standard Chuck) | 0.157"-0.562" | 4mm-14mm |
| Valve Stem Length Range (with Standard Chuck) | 2.125"-10.250" | 54mm-260mm |
| Valve Head Diameter Range | 0.781"-4.000" | 20mm-102mm |
| Valve Total Length Range | 3.500"-12.500" | 89mm-317mm |
| Valve Face Angle Range | 15°-50° | |
| Valve Grinding Wheel Diameter | 7.000" | 178mm |
| Butt Grinding Wheel Diameter | 3.000" | 76mm |
| Valve & Butt Grinding Wheel Speed | 3450 RPM at 60Hz & 2850 at 50Hz | |
| Valve Rotation Speed | 20 RPM | |
| Coolant Capacity (with Cabinet) | 5 Gallon | 20 Liter |
| Valve Grinding Motor Power | 0.5 HP, AC | 0.375 Kw, AC |
| Grinding Oil Pump Power Flow | 0.025HP - 300GPH | 0.02KW - 20LPM |
| Valve Rotation Motor Power | 0.083 HP, DC | 0.062 Kw, DC |
| Valve Stem Diameter Range (with Optional Small Chucks - VR7 Only | 0.138"-.750" | 3.5mm-19mm |
| Valve Stem Length Range (with Optional Large Chucks - VR7 Only) | 1.220"-10.250" | 31mm-260mm |
| Coolant Capacity (without Cabinet - VR7 Only) | 1 Gallon | 5 Liter |
| Dimensions - Machine (without base cabinet - VR7 Only) | 36D x 27W x 25" H | 902D x 686W x 622mm H |
| Dimensions - Shipping (without base cabinet - VR7 Only) | 27D x 34W x 25" H | 686D x 864W x 635mm H |
| Machine Weight (without base cabinet - VR7 Only) | 420 lbs | 191 Kgs |
| Dimensions - Machine | 33D x 48W x 63" H | 838D x 1220W x 1600mm H |
| Dimensions - Shipping | 36D x 36W x 57" H | 915D x 915W x 1450mm H |
| Machine Weight | 506 lbs | 230 kg |
| Electrical Requirements | 115 or 230V, 20 or 10A, 50/60Hz, 1Ph | |
| Air Requirements | cfm @ 90 psi | l/min @ 6 bar |
| Paint Color Code | RAL9002 (Grey White) | |
