Rottler EM79ATC
Multi Purpose Vertical CNC Machining Center with Automatic Tool Changer
Machine Operations
Automatic Tool Changer
Block Surfacing
Blue Print Boring
Boring & Sleeving
Circular Interpolation
Connecting Rod Boring
Cylinder Boring
Cylinder Head Resurfacing
Lifter Boring
Line Boring
Multi Purpose CNC (Custom Parts)
Thrust Cutting
EM70 Series BrochureOverview
The Rottler EM70 Series are designed for the small - medium size diesel engine rebuilder as well as the performance engine builder. The EM79ATC features an Automatic Tool Changer.
Rottler’s totally new, next generation CNC control found in the EM Series machines continues to give users unmatched speed of learning and ease of use when probing/digitizing without the need of additional cumbersome and expensive software. This advanced 4C software lets users know they are machining with the most state-of-the-science equipment available. Read more in the "Control" tab below.
Features
For more information: See brochure or contact us at +1 (253) 872-7050
Standard Equipment
Control
Rottler Exclusive Touch Screen Programming
The conveniently located control pendent centralizes the machine controls. Only the buttons and interactive menus required for a particular machine operation are displayed. Machine operations can easily be done manually or automatically, with the ability to store programs in memory. Digital readout allows the operator to accurately monitor position at all times. Control operates in metric and inch systems.
Fully Programmable Cycles
Conversational 3 axis CNC control, PC based with Windows Operating System.
Dimensions and Control through Touch Screen:
- Program Bore Centers, Exact Depth, Speed, Feed, etc.
- Machines complete bank or main line in Automatic Cycle.
- Lower Offset Boring allows lower sleeve repair in Automatic Cycle.
- Circular Interpolate Counterbores for Radius Undercut or Wide Counterbores.
- Surfacing/Milling – Multiple Pass – program for Rough Cut and Finish Cut for superior surface finish.
- Line Boring – program the bearing bores and length of each bore and the machine automatically moves from bore to bore, completing the line unattended.
- Face Main Line Thrust Faces square to centerline of Crankshaft using Rottler Circular Interpolation software.
Specifications
| EM79ATC Machine Specifications | American | Metric |
|---|---|---|
| Control | Automatic | |
| Touch Screen | 15" | 381mm |
| Machine Height | 118" | 2989mm |
| Table - Size | 91.6" x 22.6" | 2325 x 575mm |
| Table - T Slots | 5 | |
| Travel - Horizontal (X Axis) | 72" | 1829mm |
| Travel - In/Out (Y Axis) | 14" | 355mm |
| Travel - Vertical (Z Axis) | 18" | 457mm |
| Travel - Spindle Nose to Table | 40.44" | 1027mm |
| Travel - Spindle Center to Column | 21.7" | 551mm |
| Spindle - Taper | CAT 40 | CAT 45 |
| Spindle - Diameter | 3.8" | 96.5mm |
| Spindle - Rotation Speed | 0 to 2000 RPM | |
| Spindle - Motor | 6 HP | 4.5 Kw |
| Tool Changer | Optional | |
| Cylinder Bore Range (with Optional Cutterheads) | .75" - 7" | 19 - 178mm |
| Line Bore Range (with Optional Cutterheads) | 1.9" - 5.9" | 48.5 - 150mm |
| Surfacing Cutterhead Diameters | 10", 14", X" & X" | 250, 360, X & Xmm |
| Dimensions - Machine | 69D x 153W x 118" H | 1745D x 3877W x 2989mm H |
| Dimensions - Floor Space Requirements | 94D x 153W" | 2388D x 3877Wmm |
| Dimensions - Shipping | 88D x 117W x 90" H | 2235D x 2972W x 2286mm H |
| Machine Weight | 10000 lbs | 4845 kg |
| Electrical Requirements | 208-240V, 30A, 50/60Hz, 3/1Ph | |
| Air Requirements | 1 cfm @ 90 psi | 28 l/min @ 6 bar |
| Paint Color Code | RAL9002 (Grey White) | |
