Multi-Purpose CNC Machining Center
Automatic Tool Changer
Blue Print Boring
Boring & Sleeving
Connecting Rod Boring
Cylinder Head Resurfacing
Multi Purpose CNC (Custom Parts)
List below is a sample of the many Fixtures and Accessories available.
Please refer to a brochure, speak with your local Representative or
contact us direct for more information.Automatic 4th Axis Block Roll Over FixtureRottler’s Universal Quick Load/Unload Automatic Rotate 4th Axis Fixture and Software allows the computer to rotate the block or cylinder head during the automatic machining cycle. Large V blocks can be rotated 360 degrees to allow special machining jobs such as stroker clearancing in same set up as boring, surfacing and lifter bore machining. The tail stock is pneumatically operated allowing easy and fast loading and unloading of heavy blocks.Connecting Rod FixturesRottler’s patented Connecting Rod Fixtures allow large connecting rods to be surfaced and bored on the EM79 machines. The Rottler boring fixtures allow both big end and small end to be bored in one set up resulting in perfect parallelism between big end and small end. All the rods in a set can be accurately bored for equal center to center distance, a must for today’s high compression diesel engines. Special heavy duty fixtures available for boring very large, heavy connecting rods found in natural gas compressors and workboat marine engines are available.Dual Axis Leveling TableRottler’s patented dual axis leveling table and universal quick clamping system
for surfacing/milling heads, blocks and manifolds with CBN and PCD
tooling. The Rottler Dual Axis Leveling Table allows clamping of the
head to be complete first, then the level adjusted in both directions
simply by rotating the two hand wheels. Combined with Rottler's Dual
Axis Level, any job can be clamped and leveled in seconds! This process
results in minimum stock removal when surfacing.