Rottler F109AH

Multi Purpose CNC Machining Center including HSK80A Spindle Taper




Machine Operations

  • Automatic Tool Changer
  • Block Surfacing
  • Blue Print Boring
  • Boring & Sleeving
  • Circular Interpolation
  • Connecting Rod Boring
  • Cylinder Boring
  • Cylinder Head Resurfacing
  • Lifter Boring
  • Line Boring
  • Multi Purpose CNC (Custom Parts)
  • Thrust Cutting

  • Applicable Industries

  • Diesel Rebuilder
  • Earth Moving
  • Gas Compression Engine
  • Large Engine
  • Locomotive Engine
  • Marine Workboat
  • Oil & Gas
  • Power Generation
  • Remanufacturing

  • PDF Resources

    F100 Brochure
    F100 Series Optional Equipment Catalog
    F107AHL F109AHL Optional Equipment Catalog

    All F100 machines employ an array of features which help maximize the productivity capabilities of the machines.
    Quick tooling change-over maximizes the versatility and flexibility of the machine, allowing boring and surfacing in
    one set-up. F100 Series machines have the capability of Boring, Surfacing, Line Boring, and Universal Machining.
    Traveling column and spindle movements are operated by precision ball screws and AC servo motors. Optional
    Automatic cycle software and production tooling allow complete block banks to be machined without operator
    attendance, once the job is set up and the "cycle start" button is pressed, the operator is free to "walk away" and do
    other work while the F100 completes a block bank or main line bore unattended!
    • F100 machines incorporate the use of a large diameter hard chromed
      spindle, utilizing high precision angular contact bearings and automatic
      lubrication.
    • Machine ways are induction hardened and coated with turcite low friction
      material and supplied with air pressure to reduce friction and give long
      service life.
    • Anti friction ball screws and AC Servo motors provide precise machine
      positioning and rapid feed rates.
    • Air power drawbar allows cutterheads to be changed in seconds increasing
      productivity and reducing operator fatigue - the machine can be changed
      from boring to surfacing in less than 15 seconds!
    • Automated workhead tilting system for surfacing provides "back clearance"
      for superior surface finish.
      Increased clearance from spindle centerline to the machine's column allow
      large castings to be set up and machined.

    ·      
    CNC (Computer Numerical Control) Machine Using
    Windows Operating System and Industrial PC with Intel Processor.



    ·      
    Programming and Control  Thru A 15" (400mm) Computerized Touch
    Screen.



    ·      
    Precision Position Display in .0001"
    (.002mm) Resolution



    ·      
    Software Options Available for Programmable
    & Automated Cycles Such as Boring, Surfacing, Lower Sleeve Offset Boring,
    Water Hole Repairs, Main & Cam Line Boring, General CNC Machine Work



    ·      
    USB Flash Drive for File Transfer to and From
    Computer



    ·      
    Internet connection to the machine computer must
    be provided for training support and service.



    ·      
    Machine/Computer Can Operate In Either Inch Or
    Metric System



    ·      
    High Torque Servo Spindle Motor - Continuous
    1925 in.lbs - 220NM. Peak 5775 in.lbs - 652NM



    ·      
    Spindle Rotation Speed - Infinitely Variable
    0-1000RPM



    ·      
    Hard Chromed Precision Spindle Diameter 6"
    (150mm) with High Speed Angular Contact Bearings



    ·      
    SPINDLE TAPER - HSK80A QUICK CHANGE allows
    Automatic Tool Changing System



    ·      
    DIRECT DRIVE 3 Axis Movement by Precision Ball
    Screws & AC Servo Motors - Infinitely Variable    



    ·      
    Horizontal Movement (X Axis) - Left and Right
    Direction - 248" (6300mm)



    ·      
    Horizontal Movement (Y Axis) - In and Out
    Direction - 24" (610mm)



    ·      
    Vertical Movement (Z Axis) - Up and Down -
    36" (915mm)



    ·      
    Vertical, Horizontal and Spindle Load Monitoring
    for Fast Overload Shut Down



    ·      
    Electronic Hand Wheel for Manual Movement - Per
    Click: Coarse Mode .01" (.25mm) Medium Mode .001" (.01mm) Fine Mode
    .0001" (.002mm)



    ·      
    Infinitely Variable Feedrates Adjustable by Hand
    Wheel During Automatic Cycles



    ·      
    Fast Rapid and Jog Speeds for Reduced Cycle Time



    ·      
    Automatic Work Head Tilt System for Back
    Clearance During Surfacing



    ·      
    Air Assisted Quick Change Cutterhead Draw Bar
    System



    ·      
    Heat Treated Mehanite Cast Iron Machine Castings



    ·      
    Air Pressurized Column for Less Friction and
    Accurate Positioning



    ·      
    Turcite Coated Slideways for Low Friction and
    Extended  Life



    ·      
    Automatic Central Lubrication System Monitored
    by Computer



    ·      
    Chip Guard vetically adjustable with 2 LED work
    lights



    ·      
    Operation, Programming and Spare Parts Manual -
    Digital



    ·      
    Paint Color Code: RAL9002 (Grey White)

    Over 20 years ago, Rottler pioneered automation by utilizing electronics and computers. Today, Rottler utilizes
    the latest computer technology to make automation easy to learn, versatile to operate and upgradeable for future
    software. Windows operating system and touch screen control make a simple operator interface. Touch screen
    control allows ONLY the buttons and information required for each operation to be displayed, "hiding" the complex
    computer functions in the background. Operators are able to learn advanced machining functions in just a few days.



    Common, everyday jobs such as
    boring, surfacing and line boring
    can be easily automated with
    the F100 machines. Operator
    attendance is only required for
    set up. The machine is able to
    bore along a complete cylinder
    bank automatically. Likewise, the
    machine is capable of line boring
    along a main line automatically.



    Often when surfacing a block,
    more than one pass is required.
    The F100 can be programmed
    for multiple passes, moving down
    the exact amount each pass and
    completing with a finish cut for
    the required surface finish during
    the final pass.



    Bore centers are either measured from
    the block or from a blueprint, then saved
    in the memory. The F100 machine moves
    automatically to the exact positions, which
    is useful when multiple boring operations
    are required for jobs such as resleeving.
    For special applications, Optional Renishaw
    Wireless Probing can automatically find bore
    centers and measure diameters.



    When resleeving the lower seal area of wet
    liner blocks, it is often required to bore a
    diameter larger than the upper diameter.
    Rottler's Automatic Lower Sleeve Repair
    Software allows the machine to offset so
    that the boring tool will clear the upper
    diameter, move down, then move back on
    center to bore the lower area on center with
    the upper bore. Once boring is complete,
    the machine will index the cutting tool, offset
    the programmed amount and retract and
    continue to the next cylinder - automatically.

    For more information: See the F109 Brochure or give us a call at +1 (253) 872-7050
    F109AH Machine Specifications American Metric
    ControlAutomatic
    Touch Screen15"381mm
    Machine Weight50000 lbs22500 kg
    Table - Size67.5" x 240"1700 x 6100mm
    Table - T Slots4
    Travel - Horizontal (X Axis)248"6300mm
    Travel - In/Out (Y Axis)24"600mm
    Travel - Vertical (Z Axis)36"915mm
    Travel - Spindle Nose to Table67.58"1716mm
    Travel - Spindle Center to Column43.5"1100mm
    Spindle - Rotation Speed0 to 1000 RPM
    Spindle - Motor17 HP12.75 Kw
    Cylinder Bore Range (with Optional Cutterheads).75" - 20"19 - 500mm
    Line Bore Range (with Optional Cutterheads)2" - 12"50 - 300mm
    Surfacing Cutterhead Diameters10", 15", 18" & 22"250, 340, 460 & 575mm
    Dimensions - Floor Space Requirements130D x 362W"3300D x 9200Wmm
    Electrical Requirements220V, 60A, 50/60Hz, 3Ph
    Air Requirements cfm @ 100 psi l/min @ 6 bar
    Paint Color CodeRAL9002 (Grey White)
    Connecting Rod Fixture